There are three steps to enable traceroute: In policy map „global_policy“ in class „inspection_default“ you need to add „inspect icmp“ and „inspect icmp error“ In policy map „global_policy“ in class „class_default“ you need to add „set connection decrement-ttl“ On your…

ASA supports netflow exports against some of Netflow collectors, for example ntopng.  Here I'm describing steps required to configure netflow statistical export using ASA CLI. tested on ASA 5515-X, ASA OS version 8.6(1)2 to see some outputs,  kind of netflow collector…

Once we had a pre-shared key configured, we are not able to see them directly applying show running command, as the key is encrypted. The output displayed it as *******. Example: kis-asa-5515X# sh running-config | include shared ikev1 pre-shared-key *****…

In this article I'm just testing guides available at the cisco support forum (the same guide at the cisco site) or very good guide at L2TP/IPSec with Windows 8/7 and Cisco ASA 8.x/9.x, as I need a secure access to my academys network. For…

If we have access to config mode we may type config t configure factory-default   ciscoasa(config)# config factory-default Based on the management IP address and mask, the DHCP address pool size is reduced to 253 from the platform limit 256…